Suspension Adjustment According To The Motorcyclist's Weight; Adjusting The Spring Preload - Beta EVO 2T Owner's Handbook Manual

3
ADJUSTING THE SPRING
PRELOAD
To adjust the spring preload, use the pro-
cedure described below.
Loosen counter-ring 1, rotate ring 2 clock-
2
wise to increase the spring preload (and
consequently the shock absorber preload)
1
or anticlockwise to decrease it.
After obtaining the desired preload, turn
counter-ring 1 until it stops against adjust-
ing ring 2.
For standard calibration, refer to page
11.
NOTE: for movement of the rings use a
specific sector key with square pin.
ATTENTION! Do not move the screw 3
under any circumstances.
SUSPENSION ADJUSTMENT
ACCORDING TO THE
MOTORCYCLIST'S WEIGHT
3
The following table shows the approximate
calibration of the suspension adjustment
according to the motorcyclist's weight.
p < 70 Kg 70 Kg < p < 80 Kg 80 Kg < p
Adjustment Adjustment Adjustment
Fork Shock absorber Fork Shock absorber Fork Shock absorber
+ 5 turns + 1,5 turns + 10 turns + 3 turns
Standard Standard
preload preload preload preload
ATTENTION! Shock absorber pre-load
max permitted = +6 turns.
GB
32