Shock Absorber; Adjusting The Spring Preload; Adjusting The Rebound Damper - Beta EVO 2T Owner's Handbook Manual

3
ADJUSTING THE SPRING
PRELOAD
Spring preload is adjusted by means of
screw 2. Turning clockwise will increase
the preload, while rotating counter- clock-
wise decreases the preload.
2
For standard calibration, refer to page
11.

SHOCK ABSORBER

ADJUSTING THE REBOUND
DAMPER
The hydraulic brake unit in extension deter-
mines the behaviour in the extension phase
of the shock absorber and can be adjusted
using screw 1. Turning clockwise increases
1
the action of the brake in extension, while
rotating counter-clockwise decreases the
action of the brake in extension.
For standard calibration, refer to page
11.
NOTE:
for adjustment use a T-handle wrenches
with jointed hexagonal socket.
GB
31