Clock Adjustment - Beta ALP 125 cc Owner's Manual

1

2.8.1 Clock adjustment

The clock can only be adjusted when the
vehicle is stopped, keeping the button
pressed for approx. 5 sec in correspon-
dence with the standby function.
Adjustment is possible once only the
segments relating to the clock are active,
while all the other segments are switched
off (fi gure 13).
It is possible to change the hour fi rst and
Fig. 13
then the minutes depending on what num-
ber is selected (which will be displayed
fl ashing with f=1Hz, Duty=50%).
A short press of the button will allow a unit
increase of the parameter selected, while
a long press of the button will allow for
a switch from time adjustment to that of
minutes and then to exit adjustment mode.
The clock will be displayed in the format
0-24 if the unit of measurement selected
is Km/h, while it will be displayed in
format 0-12 if the unit of measurement
selected is mph.
GB
22