Front Suspension Adjustment; Rear Shockabsorber Adjustment - Beta Rev 4T Owner's Manual

Adjustment
4
B
34
betamotor.com
A
A

FRONT SUSPENSION ADJUSTMENT

Forks
- For a more reactive ride, unscrew adjuster knob B com-
pletely, with respect to the standard position.
- For a more controlled ride, preload the spring by about
4-5 turns, using screw A, and lock knob B 15 clicks from
fully open (about mid-point in the range of adjust-
ment).
- Rider's weight. Adjust to compensate for the rider's
weight as follows:
RIDER'S WEIGHT (Kg)
weight > 80
75 < weight < 80
weight < 70
In the event of any abnormality in operation, please con-
tact our chain of authorised service centres.

REAR SHOCKABSORBER ADJUSTMENT

Information on adjustment
- For a more reactive ride, back off the compression ad-
justment screw (A).
- For a more controlled ride, tighten the compression
adjustment screw (A).
Note:
For the standard adjustment, position the screw
at +12 clicks from fully open.
- Periodically clean the working area of the buffer as fol-
lows:
Lower/remove the buffer, using a small screwdriver, and
blow compressed air by means of the milling on the
spring spacer.
- Always keep a check on the tightness of the upper and
lower fixing bolts.
In the event of any abnormality in operation, please con-
tact our chain of authorised service centres.
SPRING PRELOAD
+ 10 turns
+ 5 turns
0