Clutch Lever; Lh Switch; Rh Switch - Beta EVO 2T Owner's Handbook Manual

2

CLUTCH LEVER

Clutch lever 1 is fitted to the left-hand side
of the handlebars. Screw A can be used
1
to alter the home position of the lever (see
A
Adjustments).

LH SWITCH

The off switch is positioned on the left-hand
side of the handlebar and consists of the
following:
shutdowns engine : it is necessary to
hold it until the engine stops.

RH SWITCH

2
The lights and services switch is located
on the right-hand side of the radiator and
consists of the following:
1 Rear light power on/off
2 Mapping change switch
1
By acting on the switch shown in the figure,
it is possible to select one of two possible
mappings for the ignition advance.
With the switch in position , "soft" map-
ping more suited to muddy terrain and for
a gentler response of the bike is selected.
With the switch in position "hard"
mapping that is more suitable for dry land
and for a more aggressive response of the
bike is selected.
GB
21