Front Suspension Adjustment; Rear Shockabsorber Adjustment - Beta Rev 4T Owner's Manual

Adjustment
4
RIDER'S WEIGHT (Kg)
weight > 80
75 < weight < 80
weight < 70
B
72
betamotor.com
SPRING PRELOAD
+ 10 turns
+ 5 turns
0
A
A

FRONT SUSPENSION ADJUSTMENT

Forks
- For a more reactive ride, unscrew adjuster
knob B completely, with respect to the
standard position.
- For a more controlled ride, preload the
spring by about 4-5 turns, using screw A,
and lock knob B 15 clicks from fully open
(about mid-point in the range of adjust-
ment).
- Rider's weight. Adjust to compensate for
the rider's weight as follows:
In the event of any abnormality in opera-
tion, please contact our chain of authorised
service centres.

REAR SHOCKABSORBER ADJUSTMENT

Information on adjustment
- For a more reactive ride, back off the com-
pression adjustment screw (A).
- For a more controlled ride, tighten the
compression adjustment screw (A).
Note:
For the standard adjustment, position the screw
at +12 clicks from fully open.
- Periodically clean the working area of the
buffer as follows:
Lower/remove the buffer, using a small
screwdriver, and blow compressed air by
means of the milling on the spring spacer.
- Always keep a check on the tightness of
the upper and lower fixing bolts.
In the event of any abnormality in opera-
tion, please contact our chain of authorised
service centres.