Checking The Brake Fluid Level - Yamaha YJ125S Service Manual

CHECKING THE BRAKE FLUID LEVEL

a
EAS00116
CHECKING THE BRAKE FLUID LEVEL
1. Stand the scooter on a level surface.
NOTE:
8 Place the scooter on a suitable stand.
8 Make sure the scooter is upright.
2. Check:
8 brake fluid level
Below the minimum level mark a
the recommended brake fluid to the
proper level.
Recommended brake fluid
DOT 4
w
8 8 8 8 8 Use only the designated brake fluid.
Other brake fluids may cause the rub-
ber seals to deteriorate, causing leak-
age and poor brake performance.
8 8 8 8 8 Refill with the same type of brake fluid
that is already in the system. Mixing
brake fluids may result in a harmful
chemical reaction, leading to poor brake
performance.
8 8 8 8 8 When refilling, be careful that water does
not enter the brake fluid reservoir. Wa-
ter will significantly lower the boiling
point of the brake fluid and could cause
vapor lock.
cC
Brake fluid may damage painted surfaces
and plastic parts. Therefore, always clean up
any spilt brake fluid immediately.
NOTE:
In order to ensure a correct reading of the brake
fluid level, make sure the top of the brake fluid
reservoir is horizontal.
3-32
CHK
ADJ
Add