Removing The Handlebar; Checking The Handlebar - Yamaha YJ125S Service Manual

3
1
1
EAS00666

REMOVING THE HANDLEBAR

1. Stand the scooter on a level surface.
w
Securely support the scooter so that there
is no danger of it falling over.
2. Remove:
NOTE:
While removing the handlebar switch assembly
2
(right), pull back the rubber cover.
3. Remove:
NOTE:
Blow compressed air between the handlebar and
the handlebar grip, and gradually push the grip
off the handlebar.
EAS00668

CHECKING THE HANDLEBAR

1. Stand the scooter on a level surface.
w
Securely support the scooter so that there
is no danger of it falling over.
2. Check:
w
Do not attempt to straighten a bent
handlebar as this may dangerously weaken
it.
4-44
HANDLEBAR
8handlebar switch assembly (right)1
8throttle grip assembly 2
8brake master cylinder assembly 3
8handlebar grip 1
8handlebar 1
Bends/cracks/damage
CHAS
Replace.