Checking The Wheels/Checking And Lubricating The Cables; Checking The Wheels; Checking And Lubricating The Cables - Yamaha YJ125S Service Manual

CHECKING AND LUBRICATING THE CABLES

CHECKING THE WHEELS/

EAS00168
CHECKING THE WHEELS
The following procedure applies to both of the
wheels.
1. Check:
8 wheel
Damage/out-of-round
w
Never attempt to make any repairs to the
wheel.
NOTE:
After a tire or wheel has been changed or re-
placed, always balance the wheel.
EAS00170
CHECKING AND LUBRICATING THE
CABLES
The following procedure applies to all of the in-
ner and outer cables.
w
Damaged outer cable may cause the cable
to corrode and interfere with its movement.
Replace damaged outer cable and inner
cables as soon as possible.
1. Check:
8 outer cable
Damage
2. Check:
8 cable operation
Rough movement
NOTE:
Hold the cable end upright and pour a few drops
of lubricant into the cable sheath or use a suit-
able lubricating device.
3-44
CHK
ADJ
Replace.
Lubricate.
Recommended lubricant
Engine oil or a suitable cable
lubricant
Replace.