Checking The Fuses - Yamaha YJ125S Service Manual

CHECKING AND CHARGING THE BATTERY/
2
1

CHECKING THE FUSES

6. Install:
8 battery
7. Connect:
8 battery leads
(to the battery terminals)
cC
First, connect the positive battery lead 1 1 1 1 1 ,
and then the negative battery lead 2 2 2 2 2 .
8. Check:
8 battery terminals
Dirt
Loose connection
9. Lubricate:
8 battery terminals
Recommended lubricant
Dielectric grease
10. Install:
8 battery cover
8 mat
Refer to "COVER AND PANEL".
EAS00181
CHECKING THE FUSES
The following procedure applies to all of the
fuses.
cC
To avoid a short circuit, always set the main
switch to "OFF" when checking or replacing
a fuse.
1. Remove:
8 mat
8 battery cover
Refer to "COVER AND PANEL".
3-52
CHK
ADJ
Clean with a wire brush.
Connect properly.