Checking The Front Brake Pads And Rear Brake Shoes; Checking The Brake Fluid Level - Yamaha Grand filano LTF125-I Owner's Manual

Checking the front brake pads
and rear brake shoes
The front brake pads and the rear
brake shoes must be checked for wear
at the intervals specified in the periodic
maintenance and lubrication chart.
Front brake pads
1. Brake pad wear indicator groove
Each front brake pad is provided with
wear indicator grooves, which allow
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator grooves. If a brake
pad has worn to the point that the wear
EAU22382 indicator grooves have almost disap-
peared, have a Yamaha dealer replace
the brake pads as a set.
Rear brake shoes
EAU22433
1
1
1. Brake shoe wear indicator
2. Brake shoe wear limit line
The rear brake is provided with a wear
indicator, which allows you to check
the brake shoe wear without having to
disassemble the brake. To check the
brake shoe wear, check the position of
the wear indicator while applying the
brake. If a brake shoe has worn to the
point that the wear indicator reaches
the wear limit line, have a Yamaha
dealer replace the brake shoes as a
set.
Periodic maintenance and adjustment
EAU22541
1
2
9-20

Checking the brake fluid level

Before starting off, confirm that the
brake fluid is above the minimum level
mark. (Position the handlebars so the
brake fluid in the reservoir is level to the
ground.) Replenish the brake fluid if
necessary.
1. Minimum level mark
Specified brake fluid:
DOT 3 or 4 (LTF125-I)
YAMAHA GENUINE BRAKE FLUID
(DOT 4) (LTF125-A)
WARNING
Improper maintenance can result in
loss of braking ability. Observe
these precautions:
EAU77811
1
9
EWA18870