Assembling And Installing The Front Brake Master Cylinder - Yamaha YJ125S Service Manual

2
1
2
1
1
a
2
b
FRONT BRAKE
EAS00597
ASSEMBLING AND INSTALLING THE FRONT
BRAKE MASTER CYLINDER
w
8 8 8 8 8 Before installation, all internal brake
components should be cleaned and lu-
bricated with clean or new brake fluid.
8 8 8 8 8 Never use solvents on internal brake
components.
Recommended brake fluid
DOT 4
1. Install:
8 spring 1
Install the spring with its smaller diameter
to the master cylinder kit.
8 master cylinder kit 2
2. Install:
8 circlip1
8 dust boot2
3. Install:
8 brake switch
8 brake lever
4. Install:
8 master cylinder1
8 master cylinder bracket2
9 Nm (0.9 m • kg, 6.5 ft • lb)
cC
8 8 8 8 8 Install the brake master cylinder holder
with the "UP" mark a a a a a facing up.
8 8 8 8 8 Align the end of the brake master cylin-
der holder with the punch mark b b b b b on
the handlebar.
8 8 8 8 8 First, tighten the upper bolt, then the
lower bolt.
4-23
CHAS
New