NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE
Connect Power
Connect the IEC power cord to the power port as shown below.
DC Power Option
The RACKMUX is available with connections for DC power. Models with "-24V" can be connected to an 18~36VDC (24VDC
nominal) power supply. It has connections on the rear for a user-supplied DC power supply (minimum 30 watt). This is typically
used when the RACKMUX is installed in a Telecom environment.
The RACKMUX with this feature will accept a DC power source with positive or negative polarity.
terminal is provided for easy connection.
Power Up
Power up the RACKMUX and connected computer in this order.
1.
Power On the RACKMUX
2.
Power ON the attached CPU.
If a device is plugged into the USB port on the front of the RACKMUX, it can powered-ON at any time.
Note: During power-up, do not attempt to type or otherwise use the keyboard. Doing so may result in boot errors and
loss of keyboard and mouse.
Figure 18- Connect the power cord
Figure 19- DC Power Option Terminal Block
14
A removable 3-pole screw