Software Ip Address Change - NTI RACKMUX-V15 Installation And Operation Manual

NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE
5. Enter the desired network connection settings (IP address, subnet mask, gateway) as compatible with your network.
Make note of these settings in case you need them later.
6. With the settings updated, press "Apply" to implement the changes in the KVM on IP.
on IP is no longer valid.
7. To restore connection to the KVM on IP, change the IP address on the PC back to an address compatible with your network
and now also compatible with the KVM on IP.
Having configured the KVM on IP to be compatible with your network, you can now make a direct cable connection (crossover
adapter not needed) to your network through a router or switch.

Software IP Address Change

1. Locate the program psetup.exe on the CD this manual is found on, in the "KVMonIP" subdirectory. Double-click on it.
2. Click Refresh Devices. The program will detect any network connected IP-KVM devices and display them by their MAC
addresses.
3. Click Query Device to find the current IP configuration of the selected MAC address device.
4. Set IP auto configuration as "None"; and enter the new IP address and Subnet mask.
super pass
5. Enter and
6. Click Setup Device. If the "super" login was authenticated, it'll show "Successfully configured device". Otherwise it will show
"Permission Denied".
7. With a successful IP address change, login to the KVM on IP using your browser.
as the login and password.
13
Your browser connection to the KVM