NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE
OSD Control Menu- 17 Inch Hi-Resolution Model (-HR)
The OSD (On Screen Display) Menu enables the user to select the desired characteristics of the LCD display. To activate the
OSD Menu, press the Menu button (below).
approximately 10 seconds (timing is adjustable) and it will automatically be cleared from the screen.
exiting the menu will be saved.
OSD Main Menu
The Main Menu is broken into five sections, Color, Picture, Function, OSD Menu, and Misc. Press one of the arrow buttons to
move between them. The Picture and Function sections only apply when the RACKMUX is connected as VGA instead of DVI.
To select a menu and move to characteristics within them (i.e. CSM, Brightness, or Contrast under the Picture menu), press the
Select button while the desired menu is displayed.
Characteristics that can be adjusted are described in the chart below.
Selection
Purpose
Colour
•
Contrast
Increase/decrease panel contrast level
•
Brightness
Increase/decrease panel brightness level
•
Colour Temp.
Set panel color temperature
Colour Adjust
•
Select RGB balance (goes to submenu)
Picture (VGA Only)
•
H Position
Control Horizontal position of screen
•
V Position
Control Vertical position of screen
Phase
Clock
Sharpness
To manually force auto adjust of monitor settings
Function (Fx)
(VGA Only)
To turn the Menu back OFF, either press the Exit button or just wait
19
Any changes made before
Range
• 0-100
• 0-100
• 5800K,9300K,6500K,User
• 0-100
• 0-100
• 0-100
• 0-100
• 0-100
• 1-5
Select Auto Adjust or Auto Color functions