Vga Output Resolution Support - Avtech AVC799B User Manual

When the operator password is entered,
NOT allowed to access. The operator user level needs to be set in the main menu "SYSTEM"
To switch between these two user levels, click the current user level icon to switch to the key lock mode, and move
your mouse to show the password input keypad, and enter the password of the user level you want.

4.5 VGA Output Resolution Support

Users are allowed to change the resolution depending on their display monitor.
Right-click to display the main menu, and select "ADVANCED CONFIG"
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
EXIT
Move to "VGA OUTPUT", and select the VGA resolution you want. There are three options as follows:
1024 x 768 (default)
1280 x 1024
1600 x 1200
Note: To have the best image quality on your LCD monitor, make sure (1) the selected DVR VGA output
resolution is supported by your monitor, and (2) the VGA output settings on both the LCD monitor
and DVR are consistent.
If the image is not positioned or scaled properly, please go to your monitor's menu for adjustment.
For details, please refer to the user manual of your LCD monitor.
will be shown on the status bar of the screen, and the main menu is
ADVANCED CONFIG
DE-INTERLACE
(For AVC799B & 797B Only)
FULL SCREEN DURATION
QUAD SCREEN DURATION
DWELL SCREEN DURATION
DISPLAY COVERT
HDD DISPLAY MODE
ALPHA BLENDING
VGA OUTPUT
(For AVC799B & 797B Only)
13
BASIC OPERATION
"TOOLS".
"DISPLAY".
OFF
03
03
03
ON
HDD SIZE
200
1600 x 1200