Advanced Config; Camera; Detection - Avtech AVC799B User Manual

5.5 ADVANCED CONFIG

5.5.1 CAMERA

CANERA CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11

DETECTION

ALERT
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
EXIT
1) BRIGHTNESS / CONTRAST / SATURATION / HUE
Click the current value to manually adjust the brightness/contrast/saturation/hue of each channel here.
2) COV.
Select if you want to mask the selected channel under recording (ON / OFF). When this function is activated,
the wording "COV." will be shown on the channel screen.
Note: To hide the wording "COV." When this function is on, go to "DISPLAY", and set "DISPLAY COVERT"
to "OFF". For details, please refer to "5.5.6 DISPLAY" at page 25.
3) REC
Select if you want to enable recording for the selected channel (ON / OFF).
Note: When this function is disabled, no manual, event or timer recording will be activated even if any
of these three record functions is set to "ON".
4) CHANNEL TITLE
Click "EDIT" to input the channel title (up to six characters). The default title is the channel number.
5.5.2 DETECTION
CANERA CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
EXIT
1) LS (Level of Sensitivity)
"LS" is to set the sensitivity of comparing two different images. The smaller the value is, the higher sensitivity
for motion detection. The highest sensitivity setting is 00, and the lowest sensitivity setting is 15. The default
value is 07.
2) SS (Spatial Sensitivity)
"SS" is to set the sensitivity for detecting the size of one object (the number of the grids) on the screen. The
smaller the value is, the higher sensitivity for motion detection.
The highest sensitivity setting is 00, and the lowest sensitivity setting is 15. The default setting is 03.
ADVANCED CONFIG
BRIGHTNESS
CONTRAST
SATURATION
HUE
COV.
REC
CHANNEL TITLE
ADVANCED CONFIG
LS
SS
TS
MOTION
ALARM
AREA
128
128
128
128
OFF
ON
EDIT
07
03
02
OFF
OFF
EDIT
21
MAIN MENU