Batteries - Oregon Scientific SE102 User Manual

NOTE
The backlight does not work when the low battery
icon is shown and will return to normal once the batteries
are replaced.

BATTERIES

The product uses 2 x CR2032 batteries, one for the watch
and another for the chest belt. Both are already installed.
The battery warnings are:
LOW BATTERY
ICON
VIB
*
The batteries typically last one year. The vibration feature
consumes battery life at a faster rate than the sound alarm.
We highly recommend that you contact the retailer or our
customer service department if you need to replace them.
To replace the watch battery:
1. Undo the screws and remove the back plate.
2. Using a thin blunt instrument, hook the release catch
and lift the clip.
3. Replace the old battery and then the battery clip.
4. Replace the back plate and screws.
*
for SE102 only
DESCRIPTION
Continuous flashing: The watch
battery is low. Intermittent flashing:
The watch battery is too low to run the
backlight
*
The battery is too low to run the
vibration alert
*
Both the watch and vibration battery
is low
20