Getting Started; Unpacking The Watch; Turning On The Watch (First-Time Use Only); Batteries - Oregon Scientific SE211 User Manual

GETTING STARTED

UNPACKING THE WATCH

When you unpack your VIBRA Trainer Fit / VIBRA Trainer Fit Pro
watch, make sure to keep all the packing materials in a safe place,
in case you need to later transport or return the product for
servicing.
In this box, you will find:
•
•
•
•
•

TURNING ON THE WATCH (FIRST-TIME USE ONLY)

Press any key for 2 seconds to activate the LCD display.

BATTERIES

The VIBRA Trainer Fit / VIBRA Trainer Fit Pro uses two CR2032
lithium batteries, one for the watch and another for the heart rate
chest belt. Both are already installed. See the table below for
battery warnings.
The batteries typically last one year. We highly recommend that
you contact the retailer or our customer service department if you
need to replace them.
SE211 English R9 OP_OK
Watch
Heart rate chest belt
Mounting bracket
Carry case
2 x CR2032 lithium batteries - already installed
LOW BATTERY ICON
8
DESCRIPTION
The battery is too low to run the
backlight
The battery is too low to run the
vibration alert
The watch battery is low; the
vibration alert and backlight cannot
be used
The chest belt battery is nearly too
low to send a signal to the watch
8
2006.1.5, 9:41 PM