AMX NXT-CV10 Operation/Reference Manual page 73

MVP
connection
IP info.
FIG. 62 Wireless Settings page (showing a sample unsecured configuration)
6.
Enter the SSID information by either:

FIG. 63 Site Survey of available WAPS (Unsecured WAP shown selected)

7.
From within the Wireless Security section, press the Open (Clear Text) button to open the Open (Clear
Text) Settings dialog (FIG. 64). An Open security method does not utilize any encryption methodology
but does require that an SSID (alpha-numeric) be entered. Using this method causes network packets to
be sent out as unencrypted text.
8.
Press the red SSID field (FIG. 64) to display an on-screen Network Name (SSID) keyboard.
9.
In this keyboard, enter the SSID name used on your target Wireless Access Point (case sensitive).


10.
Click Done when you've completed typing in the information.
11.
From the Open (Clear Text) Settings page (FIG. 64), press the Save button to incorporate your new
information into the panel and begin the communication process.
10" Modero Touch Panels
Automatically having it filled in by pressing the Site Survey button and from the Site Survey page,
choosing an Open WAP from within the Site Survey page and then pressing the Connect button.
Manually entering the SSID information into their appropriate fields by following steps
7 thru 9.
The card should be given the SSID used by the target WAP. If this field is left blank, the unit will
attempt to connect to the first available WAP. By default, all WAP200Gs use AMX as their
assigned SSID value.
One of the most common problems associated with connection to a WAP arise because the SSID
was not entered properly. You must maintain the same case when entering the SSID information.
ABC is not the same as Abc.
Configuring Communication
Wireless
card security settings
Select an OPEN
(unsecured) WAP
Connecting to the
WAP begins the
communication
61