AMX NXT-CV10 Operation/Reference Manual page 14

Introduction
Each panel is sold only as part of a CV10 Kit which includes both a panel and an
NXA-AVB/ETHERNET Audio/Video Breakout Box (FG2254-10). This box facilitates the installation and
distribution of video (either Composite or S-Video), data (via Ethernet), and audio to Modero touch panels
located up to 200 feet (60.96 m) from the breakout box. These panels are ideally suited for displaying full
motion video and audio with overlay graphics for applications with demanding visual requirements.
CV10 10" Widescreen Video Touch Panel Kits
NXD-CV10
(FG2259-02K)
NXT-CV10
(FG2259-01K)
NXT-CV10/PB
(FG2259-03K)
The NXD-CV10 panel (FG2259-02) is shipped, by default with a Trim Ring containing buttons, but the end
user can later install the included Trim Ring without button openings.
NXT panels can not be upgraded by simply replacing a Trim Ring on the Faceplate.
If you desire an NXT panel with available buttons, you must order the FG2259-03 Kit which includes an NXT
panel with buttons (NXT-CV10/PB).
NXT-CV10 (showing FG2259-03 without buttons)
FIG. 2
NXT-CV10 and NXD-CV10 (front views)
Key features common to both panels include:





2
10" Widescreen Color Video Wall Mount Touch Panel Kit (with buttons)
(includes both an NXD panel and an NXA-AVB/ETHERNET A/V Breakout Box).
10" Widescreen Color Video Table Top Touch Panel Kit (without buttons)
(includes both an NXT panel with no buttons and an NXA-AVB/ETHERNET
A/V Breakout Box).
10" Widescreen Color Video Table Top Touch Panel Kit (with buttons)
(includes both an NXT panel with buttons and an NXA-AVB/ETHERNET
A/V Breakout Box).
Sleep/Setup Access Button
CV10 panels are based on the latest display technology and support AMX's 4th generation (G4)
graphics which provide higher brightness, richer colors, and deeper contrast. The new G4 graphics
technology is supported by the latest AMX TPDesign4 Touch Panel Design program.
CV10 panels display eye-catching images and full-motion video on a large 16:9 image format,
while providing a wide 95-degree top-to-bottom viewing angle.
CV10 panels feature a front panel light sensor, motion sensor, IR receiver and a Sleep/Setup Access
combo button.
CV10 panels are field upgradeable to 802.11g communication via the installation of the new
NXA-WC8011GCF Wi-Fi Card Kit (FG2255-07).
CV10 panels support AMX Computer Control, which enables remote viewing and control of any
networked computer directly from the panel. This gives the user the ability to launch digital music
from a PC, cruise the Internet, check and respond to E-mail, open software files, and launch
applications. Anything you can do on your PC can be accomplished through these panels.
NXD-CV10 (shown with Button Trim Ring installed)
Programmable
Buttons/LEDs
(1-3)
Sleep/Setup Access Button
10" Modero Touch Panels
Programmable
Buttons/LED
(4-6)