AMX NXT-CV10 Operation/Reference Manual page 119

FIG. 103 Wireless Settings page (showing default values)
The elements of the Wireless Settings page are described in the table below:
Wireless Settings Page Elements
Back:
Connection Status icon:
IP Settings:
DHCP/STATIC
IP Address
Subnet Mask
Gateway
Host Name
Primary DNS
Secondary DNS
Domain
MAC Address
10" Modero Touch Panels
Saves the changes and returns you to the previously active touch panel page.
This visual display of the connection status allows the user to have a current
visual update of the panel's connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
Sets the IP communication values for the touch panel and contains:
Sets the panel to either DHCP or Static communication modes.
• DHCP (Dynamic Host Configuration Protocol) assigns IP Addresses to client
stations logging onto a TCP/IP network from a DHCP server.
• Static IP is a permanent IP Address that is assigned to a node in a TCP/IP
network.
Note: If DHCP is selected, the following fields become read-only: IP Address,
Subnet Mask, Gateway, Primary DNS, Secondary DNS, and Domain.
Sets the secondary IP Address assigned to the panel.
Sets a subnetwork address to the panel.
• Subnetwork mask is the technique used by the IP protocol to filter messages
into a particular network segment (subnet).
Sets a gateway value to the panel.
• Gateway is a computer that either performs protocol conversion between
different types of networks/applications or acts as a go-between for two or
more networks that use the same protocols.
Sets the host name of the panel.
• PRIMARY DNS sets the address of the primary DNS server being used by the
Modero panel for host name lookups.
- DNS (Domain Name System) is software that lets users locate computers
on a local network or the Internet (TCP/IP network) by host and domain. The
DNS server maintains a database of host names for its' domain and their
corresponding IP Addresses.
• SECONDARY DNS sets the secondary DNS value to the panel.
Sets the address of the primary DNS server used by the panel for host name
lookups.
Sets the secondary DNS value to the Modero panel.
Sets the unique name on the Internet to the panel for DNS look-up.
This value is factory set by the manufacturer of the wireless Ethernet card.
Firmware Pages and Descriptions
IP Settings section
Wireless Settings section
Red fields are user-editable
Blue fields cycle through choices
Grey fields are read-only
107