AMX NXT-CV10 Operation/Reference Manual page 102

Firmware Pages and Descriptions
Project Information Page Elements (Cont.)
File Name:
Designer ID:
File Revision:
Dealer ID:
Job Name:
Sales Order:
Purchase Order:
AMX IR 38k Assigned Port:
AMX IR 455k
Assigned Port:
Build Number:
Creation Date:
Revision Date:
Last Save Date:
Blink Rate:
Job Comments:
90
Displays the name of the TPDesign4 project file downloaded to the panel.
Displays the designer information.
Displays the revision number of the file.
Displays the dealer ID number (unique to every dealer and entered in TPD4).
Displays the job name.
Displays the sales order information.
Displays the purchase order information.
Displays the AMX 38 kHz IR channel port used by the IR receiver on the panel.
• This information is pulled by the panel from AMX IR Receivers section of the
TPD4 Project Properties > IR Emitters & Receivers tab.
• For IR reception, this is the port that reports a push on for the corresponding
IR code.
• IR receivers and transmitters on G4 panels share the device address number
of the panel.
Displays the AMX 455 kHz IR channel port used by the IR receiver on the
panel.
This information is pulled by the panel from AMX IR Receivers section of the
TPD4 Project Properties > IR Emitters & Receivers tab.
• For IR reception, this is the port that reports a push on for the corresponding
IR code.
• IR receivers and transmitters on G4 panels share the device address number
of the panel.
NOTE: This feature is unavailable in NXD/T-CV10 panels sold after January 1,
2011.
Displays the build number information of the TPD4 software used to create the
project file.
Displays the project creation date.
Displays the last revision date for the project.
Displays the last date the project was saved.
Displays the feedback blink rate (10th of second).
Displays any comments associated to the job. These comments are taken from
the TPD4 project file.
10" Modero Touch Panels