AMX NXT-CV10 Operation/Reference Manual page 112

Firmware Pages and Descriptions
Protected Setup Page Elements (Cont.)
System Recovery:
FIG. 95 Protected Setup page-System Recovery confirmation dialog
Channel Port
Level Port
Channel Code
Number
FIG. 96 Button/slider Function Show example
100
Allows you to either reset the touch panel to factory default settings and/or wipe
out all existing touch panel pages:
• The Reset System Settings button allows a user to wipe out all current
configuration parameters on the touch panel (such as IP Addresses, Device
Number assignments, Passwords, and other presets).
- Pressing this button launches a Confirmation dialog (FIG. 95) which asks
you to confirm your selection.
- This dialog is configured with a delay timer that does not enable the YES
button for 5 seconds. This delay provides an additional amount of time for
the user to confirm their decision.
• The Remove User Pages button allows you remove all current TPD4 touch
panel pages currently on the panel (including the pre-installed AMX Demo
pages).
- Pressing this button launches a Confirmation dialog (FIG. 95) which asks
you to confirm your selection.
- This dialog is configured with a delay timer that does not enable the YES
button for 5 seconds. This delay provides an additional amount of time for
the user to confirm their decision.
Channel Code
Number
3,132
Address
Port
Button
2,8 3,50
Address Code
Number
You have a wait time of 5 seconds
before the YES option is enabled.
Channel Port
7,10
Slider
Level Port
4,9
1,8
Channel Code
Number
10" Modero Touch Panels
Channel Code
Number
Address
Port
Address Code
Number