Default Region Code Setting - AMX MAX-HT04 Operation/Reference Manual

DVD Region Code Settings

Default Region Code Setting

By default, the MAX Server's DVD-ROM drives are set to read DVDs with Region 1 encoding (for
U.S., Canada and U.S. Territories). Depending on what region of the world you are installing and
operating the MAX, you may need to change the region code setting in order to read DVDs.
There are three sources used for loading content onto a MAX Server:
1. MDL200 with BulkRipper software running on Windows PC.
2. WinMAX running on a Windows PC - load content from local DVD/CD-ROM drive on PC.
3. MAX Server DVD/CD ROM drive - use WinMAX software for accessing the server's
DVD-ROM drive.
All of the above methods require the use of physical DVD/CD ROM drives that are covered by the DVD
CCA licensing organization. Each DVD-ROM drive adheres to the requirement that the drive must be set
to a region specific code to play authorized DVDs for that region. The requirement allows for the DVD-
ROM region code to be changed a maximum of five (5) times in a drive. The fifth time, the region code
is "locked" permanently in the drive. This procedure is mandated for all DVD-ROM manufactures that
carry the DVD logo and applies to all DVD-ROM drives used throughout the MAX system.
32
Using Windows, the properties of the physical DVD drives can be accessed and region code
changed as required.
By default, the MAX Server, MDL200 and MAX-AVP DVD-ROM drives are set to read
DVDs with Region 1 encoding (for U.S., Canada and U.S. Territories). Depending on what
region of the world you are installing and operating the server, you will need to change the
region code setting of the DVD-ROM drive in the server, MDL200 and/or PC in order to read
DVDs from other regions.
MAX Servers: HT Home Theater and MMS Multimedia Servers