Update Firmware; Scheduling Automatic Firmware Updates - AMX MAX-HT04 Operation/Reference Manual

MAX Admin Menu
5. Use the up/down arrow buttons on your keyboard to select the appropriate region code setting for
your region, and press the spacebar to make your selection (indicated by an "X" to the left of the
number).
The number of resets still available is indicated at the top of the Change Region page (FIG. 32).

Update Firmware

FIG. 33 MAX Admin Menu - Update Firmware
This set of options allows you to schedule when the server should automatically check for firmware
updates (day of week and time), and to manually update the system immediately (if updated firmware is
detected).

Scheduling Automatic Firmware Updates

Select Schedule from the Update Firmware page to schedule a day of the week and time to check for
firmware updates.
The first page that is invoked is the Day Of Week page (FIG. 34). Use the spacebar to select the day that
you want the check to be performed. Select OK to save your changes and proceed to the Select Time page
where you will specify a time for the check to be performed.
FIG. 34 Update Firmware > Schedule > Day of Week and Select Time options
If an update is detected, the firmware will automatically be downloaded and installed on the MAX
Server.
28 MAX HT Servers