Removing Modules From The System; Raid 5 Status; Raid 5 Cli - AMX MAX-HT04 Operation/Reference Manual

Max ht series digital media servers

Hide thumbs Also See for MAX-HT04:

Table of Contents

Removing Modules From the System

Select Remove in the Output Module Setup page (FIG. 11) to open a list of all modules currently

installed in the system.

To remove one or modules from the system. select each module that you want to remove and press

Delete (FIG. 15).

FIG. 15

Deleting the selected Output Module(s)

This page displays (read-only) status information for the servers RAID 5 array, including individual

status for each of the disc drives (FIG. 16). Press OK to return to the MAX Admin Menu.

FIG. 16

MAX Admin Menu - RAID 5 Status

This set of options rebuilds the server's RAID array.

This option is only for use by AMX Technical Support.

If the RAID array is rebuilt, all content on the server will be lost and the unit be

rendered inoperable.

MAX HT Servers

MAX Admin Menu

Table of Contents

Max-ht12 Max-ht04t Max-ht12t