Preparing The Max Server For Receiving Periodic Updates; Output Module Setup - AMX MAX-HT04 Operation/Reference Manual

Max ht series digital media servers

Hide thumbs Also See for MAX-HT04:

Table of Contents

FIG. 10

MAX Admin Menu - Configure TCP/IP

Preparing the MAX Server for Receiving Periodic Updates

The IP Settings (Gateway and Primary DNS) in the WinMAX Server Configuration screen must be set

correctly. To prepare your server for automatic updates:

1. Connect your PC to the Internet and open the WinMAX software.

2. Go to an MS-DOS Command Prompt on your PC and type ipconfig /all then press Enter. Note the

Default Gateway and first DNS Server settings.

3. In the System Information tab, click the Server Configuration button to access the Server

Configuration dialog.

4. Copy the Default Gateway and first DNS Server settings (from step 2) into the Gateway and

Primary DNS fields in the IP Settings section of the Server Configuration dialog.

5. Press Save Configuration. The server is now ready for auto-updates.

FIG. 11

MAX Admin Menu - Output Module Setup

This set of options allows you to add, view and delete external output modules (MAX-AVM audio-video

modules and/or MAX-AOM audio-only modules), as well as MAX-AVP Audio-Video Players.

MAX HT Servers

MAX Admin Menu

Table of Contents

Max-ht12 Max-ht04t Max-ht12t