Setting Up Your Meter; Turn Your Meter On; Setting Up Your System - OneTouch Verio Flex Owner's Booklet

2 Setting up your system

Setting up your meter

Turn your meter on

To turn your meter on, press
and hold until the start-up
test screen appears. Once the
device is on, release . You
can also turn the meter on by
inserting a test strip.
Every time you turn your meter on, a start-up screen will
appear for a few seconds. All segments of the display
should appear briefly, indicating your meter is working
properly. If the meter does not power on, check the
battery.
CAUTION:
If you see any missing segments within the start-up
screen, there may be a problem with the meter. Contact
OneTouch® Customer Care on 0800 121 200 (UK) or
1800 535 676 (Ireland).
NOTE: If you turned the meter on for the first time by
inserting a test strip instead of pressing , you will not
be able to perform a glucose test until you complete the
first time setup.
22