Removing The Used Lancet; Remove The Lancing Device Cap; Cover The Exposed Lancet Tip - OneTouch Verio Flex Owner's Booklet

Removing the used lancet

NOTE: This lancing device has an ejection feature, so you
do not have to pull out the used lancet.

1. Remove the lancing device cap

Remove the cap by turning
it counterclockwise and then
pulling it straight off of the
device.

2. Cover the exposed lancet tip

Before removing the lancet, place the lancet protective
cover on a hard surface then push the lancet tip into the
cupped side of the cover.
Taking a test
55
3