Setting Up Your Meter - OneTouch Select User Manual



Setting up your meter

Setting the meter language, date and time
You can change many of the settings that came pre-set with your meter. Before using your meter for the first time or if you change the
meter battery, you should check and update these settings. Make sure you complete steps 1 through 6 below to ensure your desired
settings are saved.
 Turn the meter on
With the meter turned off, press and hold
 Get to the SETTINGS screen
When using the meter for the first time, or after changing the meter battery, you will automatically start
in the SETTINGS screen.
In other cases, from the MAIN MENU, press
or to select METER SETTINGS. To confirm your selection, press
You may also select MENU and press
to your results for information on the FLAGS/COMMENTS feature.
The pre-set language, date, time and unit of measure appear on the display. If they are correct,
press to return to the MAIN MENU.
If the language, date, or time are not correct, select CHANGE and press
 Choose a language
Now press or
NOTE: If you select the wrong language, press
Then, turn the meter back on and re-start from step 1.
for two seconds to access MAIN MENU.
or to select SETTINGS and press
to return to the MAIN MENU. See Section 4, Attaching meal flags
to highlight the language of your choice and press
and hold for three seconds to turn the meter off.
SETTING UP YOUR METER
. Then, press
.
.
.
4
MAIN MENU
LAST RESULT
ALL RESULTS
AVERAGES
SETTINGS
METER OFF
SETTINGS
METER SETTINGS
MEAL FLAGS
MENU
SETTINGS
ENGLISH
18/OCT/07
11:48 AM
mg/dL
OK
CHANGE
LANGUAGE
FRAN AIS
Ç
ENGLISH