First Time Setup; Setting The Time; Hour Will Flash; Minutes Will Flash - OneTouch Verio Flex Owner's Booklet

First time setup

To turn your meter on, press and hold
up screen appears. Once the device is on, release
The meter will now automatically prompt you to set the
time and date. The SET icon will appear on the screen to
indicate that the meter has entered setup mode.

Setting the time

Hour will flash

• If the hour displayed
is correct, press
confirm.
• If the hour displayed is not
correct, press
change the hour and press
to confirm.

Minutes will flash

• If the minutes displayed
is correct, press
confirm.
• If the minutes displayed is
not correct, press
to change the minutes and
press
Setting up your system
to
or
to
to confirm.
to
or
23
until the start-
.
2