Setting Up Your Meter; Setting The Meter Language, Date And Time; Turn The Meter On; Choose A Language - OneTouch ULTRA2 User Manual



Setting up your meter

Setting the meter language, date and time

You can change many of the settings that came pre-set with your meter. Before using your meter for the first time or if you change the meter
battery, you should check and update these settings. Make sure you complete steps 1 to 8 below to ensure your desired settings are saved.

 Turn the meter on

With the meter turned off, press and hold for two seconds to access MAIN MENU.
 Get to the LANGUAGE screen
When using the meter for the first time, or after changing the meter battery, you will automatically
start in the LANGUAGE screen.
In other cases, from the MAIN MENU, press or to select SET UP and press .
Then press or to select METER SETTINGS and press .

 Choose a language

Now press or to highlight the language of your choice and press .
NOTE: If you select the wrong language, press
and hold for five seconds to turn the meter off.
Then, turn the meter back on and re-start from step 1.
 Set the date format
Press or to highlight the date format—choose month first (MM-DD-YYYY) or day first
(DD-MM-YYYY). To confirm your selection, press .
SETTING UP YOUR METER
4