Setting Up Your System; Setting Up Your Meter; Turn Your Meter On - OneTouch Select Plus Flex Instructions For Use Manual

Yellow= 5mm Red=7mm margin
2

Setting up your system

Setting up your meter

Turn your meter on

To turn your meter on, press
and hold until the start-up
test screen appears. Once the
device is on, release
can also turn the meter on by
inserting a test strip.
Every time you turn your meter on, a start-up screen will
appear for a few seconds. All segments of the display
should appear briefly, indicating your meter is working
properly. If the meter does not power on, check the
battery.
CAUTION:
If you see any missing segments within the start-up
screen, there may be a problem with the meter. Contact
Customer Service. Contact OneTouch® Customer Care on
0800 121 200 (UK) or 1800 535 676 (Ireland).
NOTE: If you turned the meter on for the first time by
inserting a test strip instead of pressing
be able to perform a glucose test until you complete the
first time setup.
Type: Project File Name: 3130451 Revision: 1
Effectivity Date: Mar 18 2015
Statement of Use: Verify status before each use
PF3130451Rev1_OTSPF_OB_I_GB_en_zug_R2.indd 22
. You
, you will not
22
Status: Current State: Released
3/12/15 11:35 AM