Syncing To Send Results Wirelessly To The Onetouch Reveal® Mobile App - OneTouch Verio Flex Owner's Booklet

Setting up your system
2
Syncing to send results wirelessly to the
OneTouch Reveal® Mobile App
After pairing the meter with your compatible
wireless device, you are ready to send results to the
OneTouch Reveal® Mobile App.
1. Open the OneTouch Reveal® Mobile App on your
compatible wireless device
2. Press and hold to turn the meter on and make sure
the BLUETOOTH® SMART feature is ON as indicated by ( )
If needed, press and at the same time to turn the
BLUETOOTH® SMART feature on.
The Sync symbol ( )
flashes on the meter display.
"Syncing Data" will appear
on the app to notify you that
the meter is communicating
Syncing Data
with the app.
After syncing, the Sync symbol will disappear, the
"Syncing Data" message will disappear on the app, and
the app will display a list of any new results sent from the
meter.
NOTE: Inserting a test strip during the transmission will
cancel the transfer of all results. The flashing symbol
appears on the screen and you can proceed with testing.
32