OneTouch Verio Flex Quick Start Manual

Quick Start Guide
OneTouch Verio Flex™ Blood
Glucose Monitoring System
Use this guide to get to know your meter, and follow the
steps inside to get started.
IMPORTANT: Please read the Owner's Booklet that came
with your system.
AW 06933301B
1

Set the time and date on your meter

Turn it on
Press and hold until the start-
up screen appears.
Use buttons to edit each
setting and press to confirm.
Set the time on the first SET
screen
> Hour flashes. Press if correct
or edit and confirm.
> Minutes flash. Press if
correct or edit and confirm.
Set the date on the next SET
screen
>
Year flashes. Press if
correct or edit and confirm.
>
Month flashes. Press if
correct or edit and confirm.
>
Day flashes. Press if
correct or edit and confirm.
Ready to test
Your meter setup is complete
when the screen with 3 dashes
appears.
2

Take a test

Silver prongs
Flashing blood
drop appears on the
Test port
screen.
Insert a test strip (gold side
and 2 silver prongs facing
you) to turn the meter on.
Channel
Apply blood sample to The channel turns red
the channel on either and the meter counts
side of the test strip. down from 5 to 1.
Wait for the channel to
fill.