OneTouch Verio Flex Quick Start Manual

Register your meter for
help and support:
OneTouch.ca/welcome
Quick Start Guide
OneTouch Verio Flex ® Blood
Glucose Monitoring System
Use this guide to get to know your meter, and follow the steps
inside to get started.
IMPORTANT: Please read the Owner's Booklet that came
with your system.
06933304C
1
Set the time and date on your meter
Turn it on
Press and hold until the
start-up screen appears.
Use buttons to edit each
setting and press to confirm.
Set the time on the first SET
screen
> Hour flashes. Press
if correct
or edit and confirm.
> Minutes flash. Press if
correct or edit and confirm.
> AM/PM flashes. Press
if
correct or edit and confirm.
Set the date on the next SET
screen
> Year flashes. Press
if correct
or edit and confirm.
> Month flashes. Press
if
correct or edit and confirm.
> Day flashes. Press
if correct
or edit and confirm.
Ready to test
Your meter setup is complete
when the screen with 3 dashes
appears.
2
Take a test
Flashing blood drop
appears.
Insert a test strip (gold side and
2 silver prongs facing you) to
turn the meter on.
Apply blood sample to the The channel turns red
channel on either side of and the meter counts
the test strip. Wait for the down from 5 to 1.
channel to fill.