OneTouch Verio Flex - Blood Glucose Meter Quick Start Guide
- Owner's booklet (117 pages) ,
- Owner's booklet and quick start manual (12 pages) ,
- Quick start manual (2 pages)
Advertisement
Parts and Controls
Intended use
The OneTouch Verio Flex™ Blood Glucose Monitoring System is intended to be used for the quantitative measurement of glucose (sugar) in fresh capillary whole blood samples drawn from the fingertip.
The OneTouch Verio Flex™ Blood Glucose Monitoring System is intended for self-testing outside the body (in vitrodiagnostic use) by people with diabetes at home as an aid to monitor effectiveness of diabetes control.
Limitations
The OneTouch Verio Flex™ Blood Glucose Monitoring System is intended to be used by a single patient and should not be shared. The system is not to be used for the diagnosis of or screening of diabetes or for neonatal use. The system is not for use on critically ill patients, patients in shock, severely dehydrated patients or hyperosmolar patients.
Set the time and date on your device
Turn it on 
Press and hold 
until the startup screen appears.
Use 
buttons to edit each setting and press to confirm.
Set the time on the first SET screen
- Hour flashes. Press
![]()
if correct or edit and confirm.
![Setting the time on the device - Step 1]( "OneTouch - Verio Flex - Setting the time on the device - Step 1")
- Minutes flash. Press
![]()
if correct or edit and confirm. - AM/PM flashes. Press
![]()
if correct or edit and confirm.
![Setting the time on the device - Step 2]( "OneTouch - Verio Flex - Setting the time on the device - Step 2")
Set the date on the next SET screen
- Y ear flashes. Press
![]()
if correct or edit and confirm. - Month flashes. Press
![]()
if correct or edit and confirm.
![Setting the date on the device]( "OneTouch - Verio Flex - Setting the date on the device")
- Day flashes. Press
![]()
if correct or edit and confirm.
Ready to test
Your meter setup is complete when the screen with 3 dashes appears.
Take a test
Insert a test strip (gold side and 2 silver prongs facing you) to turn the meter on.
Apply blood sample to the channel on either side of the test strip. Wait for the channel to fill. The channel turns red and the meter counts down from 5 to 1.
View your reading
| Range Indicator color bars | ||
 Below Range |  In Range |  Above Range |
Your reading appears on the display. The Range Indicator arrow points to the blue, green, or red Range Indicator color bar, to let you know your reading is below, within, or above your range limit.
Optional: Connect to a mobile device
Your meter comes with Bluetooth® Smart technology. This allows you to wirelessly send your readings to a mobile device such as a phone or a tablet, where you can view and graph them.
To learn more about using your meter's wireless feature and view a complete listing of compatible devices and software applications, visit us at www.OneTouch.com.
Connecting your device
Press 
and 
at the same time to turn the Bluetooth feature on and off. When prompted by your mobile device, enter the PIN shown on your meter into your device.
The 
symbol means Bluetooth is on.
Example of a PIN number.
Meter symbols
 | Meter power | | Bluetooth feature on |
 | Low battery |  | History Mode (past readings) |
 | Battery empty |  | Apply sample |
 | Control solution |  | Range Indicator arrow |
 | Syncing | SET | Setting mode |
About the Range Indicator
Your meter comes with a Range Indicator that automatically lets you know if your reading is below, above or within your range limits. The high and low range limits used by the Range Indicator are pre-set as follows:
For details about changing the pre-set range limits to suit your needs, refer to your Owner's Booklet.
IMPORTANT SAFETY INSTRUCTIONS
- This meter and lancing device are for single patient use only. Do Not share them with anyone else, including family members! Do Not use on multiple patients!
- After use and exposure to blood, all parts of this kit are considered biohazardous. A used kit may potentially transmit infectious diseases even after you have performed cleaning and disinfection.
For more information see: FDA Public Health Notification: "Use of Fingerstick Devices on More than One Person Poses Risk for
Transmitting Bloodborne Pathogens: Initial Communication" (2010) http://www.fda.gov/MedicalDevices/Safety/AlertsandNotices/ucm224025.htm.
CDC Clinical Reminder: "Use of Fingerstick Devices on More than One Person Poses Risk for Transmitting Bloodborne Pathogens" (2010) http://www.cdc.gov/injectionsafety/FingerstickDevicesBGM.html.
As your partner in diabetes care, we welcome you to contact us (7 days a week, 8 a.m. - 10 p.m. Eastern Time) at 1 888 567-3003 (English), 1 888 567-3010 (Español), or www.OneTouch.com.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by LifeScan Scotland Ltd. is under license. Other trademarks and trade names are those of their respective owners.
AW 06933101A
© 2015 LifeScan, Inc.
Manufactured by:
LifeScan Europe
Division of Cilag
GmbH International
Gubelstrasse 34
6300 Zug
Switzerland
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download OneTouch Verio Flex - Blood Glucose Meter Quick Start Guide
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Verio Flex that isn't answered in the manual? Leave your question here.