Download Print this page
Powernail 445 XLL Operation And Maintenance Manual

Powernail 445 XLL Operation And Maintenance Manual

Pneumatic nailer

Advertisement

Operation and Maintenance Manual
Models 445 XLL, XLS, LL, LS, SL, SS, & SN
MODELS 445 XL, XS, LL, LS, SL, SS & SN
For this parts list and other Powernailer schematics, please visit the
Read this manual before you use this Nailer. Follow all
safety warnings and instructions. Do not attempt any
disassembly or repairs while the air line is connected.
Always disconnect the air line first. Do not use excessive
Read this manual before you use this Nailer.
Follow all safety warnings and instructions. Do
not attempt any disassembly or repairs while
the air line is connected. Always disconnect the
air line first. Do not use excessive unregulated
POWERNAIL
POWERNAIL
1300 Rose Road, Lake Zurich, IL 60047
1300 Rose Road, Lake Zurich, IL 60047
phone: 1-800-323-1653
Phone: 1-800-323-1653
website: www.powernail.com
Website: http://www.powernail.com
Operation and Maintenance Manual
Pneumatic Powernailer
PNEUMATIC POWERNAILER
Powernail Parts Store at http://www.powernail.com
1
®
WARNING
unregulated air pressure. If you are uncertain about the
operation of the Nailer, call us directly at 1-800-323-1653
WARNING
for assistance or contact the closest Powernail
help. Please retain this information for future reference.
air pressure. If you are uncertain about the
operation of the Nailer, call us directly a 1-800-
323-1653 for assistance or contact the closest
Powernail ® Dealer for help. Please retain this
information for future reference.
CO.
®
CO.
®
®
REVISION G.3
REVISION G.3—0805
REVISION G3-102709
®
Dealer for

Advertisement

loading
Need help?

Need help?

Do you have a question about the 445 XLL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Powernail 445 XLL

  • Page 1 Phone: 1-800-323-1653 website: www.powernail.com Website: http://www.powernail.com Operation and Maintenance Manual Operation and Maintenance Manual Models 445 XLL, XLS, LL, LS, SL, SS, & SN MODELS 445 XL, XS, LL, LS, SL, SS & SN ® Pneumatic Powernailer PNEUMATIC POWERNAILER ®...
  • Page 2 Pneumatic Nailer is the latest model designed the rubber mallet, pull the safety trigger and tap the to bring Powernail quality to a pneumatic Nailer. plunger with the rubber capped mallet end and let the For those looking for the ease of use of a Nailer drive and set the nail at the correct 45 degree pneumatic tool, the Powernailer Model 445—...
  • Page 3: Operation

    OPERATION Read these instructions carefully before you use the Nailer. WARNING Whenever air is connected to Fill the lubricator with a high-quality Air Tool the Nailer, keep body parts Oil. Adjust the lubricator to the manufacturers’ away from the nail discharge path. Disconnect the recommendations.
  • Page 4: Parts And Service

    TO LOAD MODEL 445 XLL, LL or SL: NEVER FIRE THE NAILER WITHOUT THE RUBBER BUMPER INSTALLED, IT WILL Place up to two sticks (200 Powercleats) into the Nail Channel feed slot. Pull back the spring loaded SEVERELY DAMAGE THE NAILER.
  • Page 5 direction of the chamfer when you replace the Rubber 6. Plunger Wiper Seal (#25) Seat. 7. Return Cylinder O-Ring Gasket (#26) To change Seals follow these procedures. Be sure 3. Replace the Rubber Seat, Support Ring and Cylinder Sleeve. Be sure to re install the steel Cylinder the air line is disconnected from the Nailer first Sleeve with the chamfered inside edge facing the before making any repairs.
  • Page 6 2. All seal surfaces must be clean and lubricated Videos and Instructions, generously with the supplied Mobile DTE Light Visit our Web Site Air Tool Oil lubricant. at: www.Powernail.com Replace any part that shows signs of wear. 3. Use care when installing the seals into their...
  • Page 7 3. Separate the Foot and gate with a screw driver just enough to clear out the jammed nail. 4. Put thread locking compound on all screws and reassemble the components. Pneumatic Seal Part Numbers and Locations...
  • Page 8 MODELS 445 XLL, XLS, LL, LS, SL, SS & SN PARTS LIST Assembly QTY. ITEM # PART NO. DESCRIPTION or Kit REQ’D BODY 09-445-29701 09-445-29702 09-445-29703 HANDLE, LONG 09-445-29703.1 HANDLE, SHORT 09-445-29704 HANDLE, HALF A-6/A-7/A-19 09-445-29705 ADAPTER FOOT 09-445-29706 FOOT...
  • Page 9 MODELS 445 XLL, XLS, LL, LS, SL, SS & SN PARTS LIST QTY. Assembly ITEM # PART NO. DESCRIPTION REQ’D or kit 09-445-29751 #8-32 LOCKNUT (SPACER) 09-445-29754 #10-32 x 1/2” S.H.C.S. w/Patch (FOOT) 09-445-29832 #10-32 x 3/4” S.H.C.S. (PLUNGER) A-11 09-445-29756 1/4”...
  • Page 10 SCHEMATIC MODELS 445 XLL, XLS, LL, LS, SL, and SS...
  • Page 11 SCHEMATIC 445 SN SURFACE NAILER...
  • Page 12 POWERCLEATS LENGTH DETERMINATION CHART This chart will assist you in determining the proper length of Powercleats to use for various thicknesses of flooring. Approximate vertical penetration of the Powercleat under the hardwood floor is shown for each application. This is only a guide. Results should be tested in the field before proceeding.
  • Page 13 POWERNAILER MODEL 445 TROUBLE SHOOTING CHART PROBLEM POSSIBLE CAUSE SOLUTION Check air supply for 70 psi minimum to 110 psi 1. Zero or Low air pressure maximum 2. Lack of lubrication Manually lubricate through male air inlet fitting Driving blade 3.

This manual is also suitable for:

445xls445ll445ls445sl445ss445 sn