Powernail 445 XLL Operation And Maintenance Manual
Mallet actuated pneumatic nailer
Hide thumbs
Also See for 445 XLL:
- Operation and maintenance manual (16 pages) ,
- Operation and maintenance manual (13 pages) ,
- Operation and maintenance manual (16 pages)
Advertisement
Quick Links
Operation and Maintenance Manual
Models 445 XLL, XLS, LL, LS, SL, SS, & SN
MODELS 445 XL, XS, LL, LS, SL, SS & SN
Read this manual before you use this Nailer. Follow all
Read this manual before you use this Nailer.
safety warnings and instructions. Do not attempt any
Follow all safety warnings and instructions. Do not
disassembly or repairs while the air line is connected.
attempt any disassembly or repairs while the air
Always disconnect the air line first. Do not use excessive
line is connected. Always disconnect the air line
first. Do not use excessive unregulated air pressure.
POWERNAIL
POWERNAIL
1300 Rose Road, Lake Zurich, IL 60047
1300 Rose Road, Lake Zurich, IL 60047
Phone: 1-800-323-1653
phone: 1-800-323-1653
Website: http://www.powernail.com
website: www.powernail.com
Operation and Maintenance Manual
Pneumatic Powernailer
PNEUMATIC POWERNAILER
1
®
WARNING
WARNING
unregulated air pressure. If you are uncertain about the
If you are uncertain about the operation of the Nailer,
operation of the Nailer, call us directly at 1-800-323-1653
call us directly a 1-800-323-1653 for assistance
for assistance or contact the closest Powernail
or contact the closest Powernail
help. Please retain this information for future reference.
Please retain this information for future reference.
CO.
CO.
®
®
®
REVISION G.3
®
Dealer for help.
REVISION G.3—0805
REVISION G3-0708
Dealer for
®
Advertisement
Related Manuals for Powernail 445 XLL
Summary of Contents for Powernail 445 XLL
- Page 1 1-800-323-1653 Website: http://www.powernail.com website: www.powernail.com Operation and Maintenance Manual Operation and Maintenance Manual Models 445 XLL, XLS, LL, LS, SL, SS, & SN MODELS 445 XL, XS, LL, LS, SL, SS & SN ® Pneumatic Powernailer PNEUMATIC POWERNAILER ®...
-
Page 2: Operation
Pneumatic Nailer is the latest model designed to bring the rubber mallet, pull the safety trigger and tap the Powernail quality to a pneumatic Nailer. For those plunger with the rubber capped mallet end and let the looking for the ease of use of a pneumatic tool, the Nailer drive and set the nail at the correct 45 degree Powernailer Model 445—designed for use with 1-1/2”,... - Page 3 AIR SUPPLY: TO LOAD MODEL 445 XLL, LL or SL: The air must be clean and dry. Dirty and/or wet air Place up to two sticks (200 Powercleats) into the Nail will damage the Nailer. A combination filter-regulator- Channel feed slot. Pull back the spring loaded Nail...
-
Page 4: Seal Replacement
SEAL REPLACEMENT: There are 7 seals that may require replacement. We Rubber Seat (#19): recommend that you have your POWERNAIL Dealer 1. Remove the Cylinder Sleeve (#13). The Cylinder replace the Seals. Sleeve should slide out of the Nailer Body when you pull out the Driving Blade Assembly. - Page 5 ® the Teflon Seal Ring. DO NOT OVER STRETCH THE Return Cylinder O-Ring Gasket (#26): ® ® TEFLON SEAL RING! Be sure the Teflon Seal Ring is 1. Place a new O-Ring Gasket in the groove on top of centered all around the seal groove and not twisted. the Return Cylinder when you reassemble the Driving Blade Assembly.
- Page 6 TO CLEAR A NAIL JAM (continued): 3. Separate the Foot and gate with a screw driver just enough to clear out the jammed nail. 4. Put thread locking compound on all screws and reassemble the components.
- Page 7 MODELS 445 XLL, XLS, LL, LS, SL, SS & SN PARTS LIST Assembly QTY. ITEM # PART NO. DESCRIPTION or Kit REQ’D 09-445-29701 BODY 09-445-29702 09-445-29703 HANDLE, LONG 09-445-29703.1 HANDLE, SHORT 09-445-29704 HANDLE, HALF A-6/A-7/A-19 09-445-29705 ADAPTER FOOT 09-445-29706 FOOT...
- Page 8 MODELS 445 XLL, XLS, LL, LS, SL, SS & SN PARTS LIST QTY. Assembly ITEM # PART NO. DESCRIPTION REQ’D or kit 09-445-29751 #8-32 LOCKNUT (SPACER) 09-445-29754 #10-32 x 1/2” S.H.C.S. (FOOT) 09-445-29832 #10-32 x 3/4” S.H.C.S. (PLUNGER) A-11 09-445-29756 1/4”...
- Page 9 POWERNAILER MODELS 445 XLL, XLS, LL, LS, SL, SS...
- Page 10 POWERNAILER MODEL 445 SN...
- Page 11 POWERCLEATS LENGTH DETERMINATION CHART ® This chart will assist you in determining the proper length of Powercleats to use for various thicknesses of flooring. Approximate vertical penetration of the Powercleat under the hardwood floor is shown for each application. This is only a guide. Results should be tested in the field before proceeding.
- Page 12 POWERNAILER MODEL 445 TROUBLE SHOOTING CHART PROBLEM POSSIBLE CAUSE SOLUTION Check air supply for 70 psi minimum to 110 psi 1. Zero or Low air pressure maximum 2. Lack of lubrication Manually lubricate through male air inlet fitting Driving blade 3.
Need help?
Do you have a question about the 445 XLL and is the answer not in the manual?
Questions and answers