Configuration On A Computer - Fuji Xerox DocuCentre-II 3005 Administrator's Manual

15 Security
4) Click the [Import] button. When a screen to enter the user name and passcode
Note
7
Refresh the web browser.
8
Click [+] on the left of [PKI Settings] to display the items in the folder.
9
Configure the certificate.
1) Click [Certificate Management].
2) Select [Local Device] for [Category], [Scan File] for [Certificate Purpose], and then
3) Select the owner of the certificate to be set.
4) Click the [Display Certificate] button.
5) Click the [Select Certificate] button.
6) Click [Reboot Machine]. The machine will reboot and the setting values will be
10
Configure the settings for PDF Signature/DocuWorks Signature.
1) Refresh the web browser.
2) Click [+] on the left of [PKI Settings] to display the items in the folder.
3) Click [PDF/DocuWorks Security/Settings] and then set the following items.
PDF Signature
Select the setting for PDF Signature from [Do not add signature], [Always add visible
15
signature], [Always add invisible signature], or [Select during send].
DocuWorks Signature
Select the setting for DocuWorks Signature from [Do not add signature], [Always add
signature], or [Select during send].
4) Click [Apply].

Configuration on a Computer

The following describes the configuration for a computer.
Sending a DocuWorks security certificate file from the machine to a computer
It is necessary to register a personal certificate of a person to whom the data is
disclosed on the machine, and then register the certificate to the address book.
When registering a personal certificate on the machine, the root certificate should be
included in the personal certificate.
For information on how to import a certificate, refer to the CentreWare Internet Services online help.
Sending a PDF or DocuWorks signature file from the machine to a computer
Confirm if the root certificate of the certificate for the scan file signature of the machine
is registered on the recipient's computer.
148
appears, enter the System Administrator user ID and passcode into [User Name]
and [Password], and then click [OK].
• The default user ID is "11111" and the default passcode is "x-admin".
click the [Display the List] button.
reflected.