Configuration Of E-Mail Encryption/Digital Signature; Installation Overview; Configuration On The Machine - Fuji Xerox DocuCentre-II 3005 Administrator's Manual

15 Security

Configuration of E-mail Encryption/Digital Signature

Installation Overview

The following is the procedure for E-mail Encryption/Digital Signature.

Configuration on the Machine

Configure a certificate to the machine. No certificate is imported on the machine in
the default settings.
Configuration on a Computer
Prepare a certificate that is suitable for E-mail Encryption/Digital Signature.
Configuration on the Machine
To configure certificates by CentreWare Internet Services, first encrypt HTTP
communication, import a created certificate to the machine, and then enable S/MIME.
For information on the settings for encrypting HTTP communication, refer to "Configuration of HTTP
Communication Encryption" (P.141)
For information on how to use CentreWare Internet Services, refer to "Using CentreWare Internet
Services" (P.63).
1
Start a web browser.
2
Enter the machine's IP address or the Internet address beginning with "https" to the
15
address box on the browser, and press the <Enter> key.
Example of the IP address entry
https://192.168.1.1/
Example of the Internet address entry
https://myhost.example.com/
Note
3
Click the [Properties] tab.
4
Confirm that [Machine's E-mail Address] of [Description] is filled.
5
Click [+] on the left of [PKI Settings] to display the items in the folder.
6
Click [Certificate Management].
7
Import a certificate.
Important • When importing a certificate, if the same certificate has been already registered in [Local
1) Enter [Password].
2) Enter [Re-enter Password].
3) Enter a file name you want to import. Or select a file to be imported from a dialog
4) Click the [Import] button. When a screen to enter the user name and passcode
Note
144
• When specifying a port number, add ":" and the port number to the end of the Internet
address.
Device] or [Others], the certificate cannot be imported. Delete the registered certificate
before importing.
box displayed by clicking the [Browse] button and then click [Save].
appears, enter the System Administrator user ID and passcode into [User Name]
and [Password], and then click [OK].
• The default user ID is "11111" and the default passcode is "x-admin".