Machine Components - Fuji Xerox DocuCentre-II 3005 Administrator's Manual

2 Product Overview

Machine Components

This section describes the main components and functions of the machine.
8
9
10
2
No. Component
1 Duplex automatic
document feeder (optional)
2 Control panel
3 Exit 2 Tray (optional)
4 Center output tray
5 Power switch
6 Front cover
7 Tray 1 - 2
Tray 3 - 4 (optional)
8 Side Tray (optional)
9 Duplex module (optional)
10 Tray 5 (Bypass)
14
Automatically feeds 2 sided originals from a stack.
Note • In this manual, the duplex automatic document feeder is abbreviated as
"document feeder".
Consists of operation buttons, LED indicators and a touch screen.
Refer to "Control Panel" (P.28).
Printed or copied documents are delivered with the printed side facing
down.
Printed or copied documents are delivered with the printed side facing
down.
Note • When the Exit 2 Tray is installed on the machine, the center output tray
is referred to as "center tray - lower".
Switches the power of the machine on/off.
Opened to replace consumables.
Accommodates papers.
Printed or copied documents are delivered with the printed side facing up.
Automatically prints or copies on the both sides of paper.
Used for loading non-standard paper (thick-stock paper, and other
special media) that cannot be loaded in the Trays 1 to 4.
1
2
3
4
5
6
7
Function