Port Setting - Planet LRP-822CS User Manual

4.9.12.2 Port Setting

Storm control for the switch is configured on this page. There are three types of storm rate control:
Broadcast storm rate control

Unknown Unicast storm rate control

Unknow Multicast storm rate contro.l

The configuration indicates the permitted packet rate for unknown unicast, unknown multicast, or broadcast traffic across the
switch. The Storm Control Configuration screens in
The page includes the following fields:
Object
 Port
 Port State
 Action
 Type Enable
 Rate (kbps/pps)
Figure 4-9-71
Figure 4-9-71 Storm Control Setting Page Screenshot
Description
Select port for this drop down list.
Enable or disable the storm control status for the given storm type.
Configures the action performed when storm control is over rate on a port. Valid
values are Shutdown or Drop.
The settings in a particular row apply to the frame type listed here:
 broadcast
 unknown unicast
 unknown multicast
Configure the rate for the storm control. The default value is "10,000".
271
User's Manual of LRP-822CS
& Figure 4-9-72 appear.