Planet LRP-822CS User Manual page 248

The page includes the following fields:
Object
 Port
 State
 Rate Limit (pps)
Buttons
: Click to apply changes
The page includes the following fields:
Object
 Port
 Rate Limit (pps)
Description
Select port from this drop-down list
Set default or user-define
Configure the rate limit for the port policer. The default value is "unlimited". Valid
values are in the range 1 to 300.
Figure 4-9-43 DHCP Rate Limit Setting Page Screenshot
Description
The switch port number of the logical port
Display the current rate limit
248
User's Manual of LRP-822CS