Planet LRP-822CS User Manual page 88

The page includes the following fields:
Object
 Session ID
 Monitor Session State
 Destination Port
 Allow-ingress
 Sniffer TX Ports
 Sniffer RX Ports
Buttons
: Click to apply changes.
Figure 4-3-9 Port Mirroring Settings Page Screenshot
Description
Set the port mirror session ID. Possible ID are: 1 to 4.
Enable or disable the port mirroring function.
Select the port to mirror destination port.
Frames from ports that have either source (RX) or destination (TX) mirroring enabled are
mirrored to this port.
Frames transmitted from these ports are mirrored to the mirroring port. Frames received
are not mirrored.
Frames received at these ports are mirrored to the mirroring port. Frames transmitted are
not mirrored.
Figure 4-3-10 Mirroring Status Page Screenshot
88
User's Manual of LRP-822CS