Table of Contents
Advertisement
Multiple Nodes
LRP Compatibility
Console
Switch Architecture
Switch Fabric
Address Table
Shared Data Buffer
Flow Control
Reset Button
LED
Dimensions (W x D x H)
Weight
Power Requirements
ESD Protection
Power Consumption
Enclosure
Layer 2 Functions
Port Mirroring
VLAN
Link Aggregation
Spanning Tree Protocol
IGMP Snooping
MLD Snooping
Access Control List
QoS
Up to 4 LRP extenders within 1km RG-6/U coaxial cable*
* The actual extender nodes vary on the quality of the copper wire and
environmental factors.
LRP-101CE: 1-Port 10/100TX PoE PSE + 1-Port Coax Long Reach PoE
Extender
1 x RS232-to-RJ45 serial port (115200, 8, N, 1)
Store-and-Forward
9.6Gbps / non-blocking
8K entries
4.1 megabits
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
< 5 sec: System reboot
> 5 sec: Factory default
PWR, SYS, LNK, PoE-in-Use, 1000, LNK/ACK, Fan 1 Alert, Fan 2 Alert,
PoE PWR Alert
440 x 300 x 44.5 mm, 1U height
4282g
AC 100~240V, 50/60Hz, auto-sensing
6KV DC
320 watts / 1091.8 BTU
Metal
TX / RX / both
Many-to-1 monitor
802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
IEEE 802.3ad LACP and static trunk
Supports 4 groups of 4-port trunk
STP / RSTP / MSTP
IGMP (v2/v3) Snooping
IGMP Querier
Up to 256 multicast groups
MLD (v1/v2) Snooping, up to 256 multicast groups
IPv4/IPv6 IP-based ACL / MAC-based ACL
8 mapping ID to 8 level priority queues
- Port number
20
User's Manual of LRP-822CS
Advertisement
Table of Contents
