Check Points Of Every 100 Hours - Kubota SM-E4B Series Workshop Manual

SM-E4B SERIES, WSM

[5] CHECK POINTS OF EVERY 100 HOURS

Changing Engine Oil (for Standard Depth Oil Pans)
CAUTION
• Be sure to stop engine before changing engine oil.
1. Start and warm up the engine for approx. 5 minutes.
2. Place an oil pan underneath the engine.
3. To drain the used oil, remove the drain plug (2) at the bottom of
the engine and drain the oil completely.
4. Screw the drain plug (2).
5. Fill new oil up to upper line on the dipstick (1).
IMPORTANT
• When using an oil of different maker or viscosity from the
previous one, remove all of the old oil.
• Never mix two different types of oil.
• Engine oil should have properties of API classification CF
(See page G-6).
• Use the proper SAE Engine Oil according to ambient
temperature.
• Upon an oil change, be sure to replace the gasket with new
one.
Above 25 °C (77 °F)
0 °C to 25 °C (32 °F to 77 °F)
Below 0 °C (32 °F)
Model
*Z482-E4B
*D722-E4B
D782-E4B
Z602-E4B
D902-E4B
*101 mm (3.98 in.) oil pan depth is optional.
Drain plug with
copper gasket
Tightening
torque
Drain plug with
rubber coated
gasket
(1) Dipstick
G-13
SAE 30 or SAE 10W-30, SAE 10W-40
SAE 20 or SAE 10W-30, SAE 10W-40
SAE 10W or SAE 10W-30
SAE 10W-40
Engine oil capacity
Oil pan depth
101 mm (3.98 in.) 121 mm (4.76 in.)
2.1 L
0.55 U.S.gals 0.66 U.S.gals
3.2 L
0.85 U.S.gals 1.0 U.S.gals
–
0.95 U.S.gals
2.5 L
0.66 U.S.gals
3.7 L
0.98 U.S.gals
33 to 37 N·m
M12 × 1.25 3.3 to 3.8 kgf·m
24 to 27 lbf·ft
64 to 73 N·m
M22 × 1.5 6.5 to 7.5 kgf·m
47 to 54 lbf·ft
45 to 53 N·m
M22 × 1.5 4.5 to 5.5 kgf·m
33 to 39 lbf·ft
(2) Drain Plug
9Y1210785GEG0012US0
KiSC issued 01, 2013 A
GENERAL
2.5 L
3.8 L
3.6 L
–
–