Starter - Kubota SM-E4B Series Workshop Manual

SM-E4B SERIES, WSM

(7) Starter

Overrunning Clutch
1. Check the pinion and if worn or damage, replace the clutch
assembly.
2. Check that the pinion turns freely and smoothly in the
overrunning direction and does not slip in the cranking direction.
3. If the pinion slips or does not turn in both directions, replace the
overrunning clutch assembly.
NOTE
• Do not wash off the grease in the overrunning clutch with
the chemicals or oils.
[A] Electromagnetic Drive Type
1-S69
ENGINE
[B] Planetary Gear Reduction Type
9Y1210785ENS0101US0
KiSC issued 01, 2013 A