Wiring Diagram Without Thermostat - HAMPTON BAY H27-NG10 Owners & Installation Manual

installation
|
36

WIRING DIAGRAM WITHOUT THERMOSTAT

WARNING:
Electrical Grounding
Instructions
This appliance is equipped with
a three pronged (grounding) plug
for your protection against shock
hazard and should be plugged
directly into a properly grounded
three-prong receptacle. Do not
cut or remove the grounding
prong from this plug.
36 |
Hampton H27-10 Direct Vent Freestanding Gas Stove
®
This heater does not require a 120V A.C. supply
for operation. In case of a power failure, the re-
mote control/thermostat will continue to operate.
However, a 120V A.C. power supply is needed
for the fan/blower operation.
CAUTION:
Ensure that the wires do
not touch a hot surface and are away
from sharp edges.
Note:
4 AA Batteries must be installed into the back
up battery compartment however for this unit
to operate when power is lost. See battery
back up instructions in this manual The fan
and or lights will not operate during a power
outage.